Organization
Undergraduate School School of Science and Technology Associate Professor
Title
Associate Professor
External link
Degree
-
Ph. D. ( 2014.3 Tokyo Institute of Technology )
-
Master of Engineering ( 2004.3 Kyoto University )
-
Bachelor of Engineering ( 2002.3 Kyoto University )
Research Interests
-
Deployability
-
Origami
-
FEM
-
Vibration
-
Acoustics
-
Noise
-
Design
Research Areas
-
Other / Other / Origami engineering
-
Manufacturing technology (mechanical,electrical/electronic, chemical engineering) / Design engineering / Design engineering
Education
-
Kyoto University Graduate School, Division of Engineering Department of Aeronautics and Astronautics
2002.4 - 2004.3
Country/Region： Japan
-
Kyoto University Faculty of Engineering Undergraduate School of Engineering Science
1998.4 - 2002.3
Country/Region： Japan
Research History
-
University of Technology Malaysia Malaysia-Japan International Institute of Technology Adjunct Professor
2026.4
Country/Region：Malaysia
-
University of Technology Malaysia Malaysia-Japan International Institute of Technology Associate Professor Visiting Associate Professor
2024.6 - 2025.5
Country/Region：Malaysia
-
Swinburne University of Technology Department of Mechanical Engineering and Product Design Engineering Associate Professor Visiting Associate Professor
2023.4 - 2024.3
Country/Region：Australia
-
Meiji University Department of Mechanical Engineering Associate Professor Associate Professor
2019.4
Country/Region：Japan
-
Meiji University Department of Mechanical Engineering Lecturer Senior Assistant Professor
2016.4 - 2019.3
Country/Region：Japan
-
The University of Oxford Department of Engineering Science Researher Postdoc Visiting Researcher
2016.2 - 2016.3
Country/Region：United Kingdom
-
Meiji University Department of Mechanical Engineering Assistant Professor Assistant Professor
2014.4 - 2016.3
Country/Region：Japan
-
Meiji University Meiji Institute for Advanced Study of Mathematical Sciences Researher Postdoc Research fellow
2012.4 - 2014.3
Country/Region：Japan
-
Tokyo Institute of Technology Department of Mechanical Sciences and Engineering Researher Postdoc Research fellow
2012.1 - 2012.3
Country/Region：Japan
-
Nihon Michelin Tire Co. Ltd. Engineer
2004.4 - 2011.12
Country/Region：Japan
Professional Memberships
-
Japan Society of Spring Engineers
2014.10
-
American Society of Mechanical Engineers
2014.9
-
Japan Society for Simulation Technology
2014.6
-
Japan Society of Mechanical Engineers
2014.2
-
Japan Society for Industrial and Applied Mathematics
2012.11
Committee Memberships
-
Japan Society of Mechanical Engineers Member of executive committee, D&S2025 conference of JSME
2025.2 - 2025.9
Committee type：Academic society
-
Department of Environment, Kawasaki City, Kanagawa, Japan Member of experts board
2024.4
Committee type：Municipal
-
Japan Society of Mechanical Engineers administrator of Kanagawa block, Kanto blanch, Japan Society of Mechanical Engineers
2024.4 - 2026.3
Committee type：Academic society
-
Japan Inter-society Liaison Association Committee for Promoting Equal Participation of Men and Women in Science and Engineering Management committee member (JSIAM)
2023.11 - 2024.10
Committee type：Other
-
Japan Society for Industrial and Applied Mathematics Director (Diversity, equity & inclusion, Annual conference)
2023.6
Committee type：Academic society
-
8th International Meeting on Origami in Science, Mathematics and Education (8OSME) Conference organizer
2023.6 - 2024.7
Committee type：Academic society
-
Japan Society of Mechanical Engineers administrator of Kanagawa block, Kanto blanch, Japan Society of Mechanical Engineers
2023.4 - 2024.3
Committee type：Academic society
-
Japan Society of Mechanical Engineers representative of Design and Systems Division, Japan Society of Mechanical Engineers
2022.4
Committee type：Academic society
-
Japan Society for Industrial and Applied Mathematics ICIAM2023 Program committee member
2021.8 - 2023.8
Committee type：Academic society
-
Japan Society for Industrial and Applied Mathematics Editor of the Transactions of JSIAM
2021.4
Committee type：Academic society
-
Japan Society of Mechanical Engineers administrator of Kanagawa block, Kanto blanch, Japan Society of Mechanical Engineers
2021.4 - 2023.3
Committee type：Academic society
-
Japan Society of Spring Engineers Director
2020.6
Committee type：Academic society
-
Japan Society of Spring Engineers Councillor
2020.6
Committee type：Academic society
-
Japan Society for Simulation Technology JASSE guest editor
2018.9 - 2023.9
Committee type：Academic society
-
Japan Society for Industrial and Applied Mathematics Representative member
2018.4
Committee type：Academic society
-
National Institute of Science and Technology Policy, Ministry of Education, Culture, Sports, Science and Technology Expert Investigator
2017.4 - 2021.3
Committee type：Government
-
Japan Society for Industrial and Applied Mathematics Associate editor of the journal of JSIAM
2017.4 - 2019.3
Committee type：Academic society
-
Japan Society of Mechanical Engineers Secretary of MoViC2017, Society of Mechanical Engineers
2017.1 - 2017.12
Committee type：Academic society
-
Japan Society of Mechanical Engineers Member of public relations comittee
2016.4 - 2017.3
Committee type：Academic society
-
Japan Society for Industrial and Applied Mathematics Editor of the journal of JSIAM
2015.4 - 2017.3
Committee type：Academic society
-
Japan Society for Industrial and Applied Mathematics Editor of JSIAM Letters
2015.4 - 2017.3
Committee type：Academic society
-
Japan Society of Mechanical Engineers Editor of the journal of JSME
2015.4 - 2016.3
Committee type：Academic society
-
Japan Society for Industrial and Applied Mathematics Member of presentation award selection committe, Joint conference of JSIAM research groups 2015
2015.3 - 2015.5
Committee type：Academic society
-
Japan Society for Industrial and Applied Mathematics Member of executive committee, Joint conference of JSIAM research groups 2015
2014.10 - 2015.3
Committee type：Academic society
-
Japan Society for Simulation Technology Editor of the journal of JSST
2014.6 - 2018.7
Committee type：Academic society
Papers
-
Quasi-zero-stiffness Vibration Isolator Using Double-layered Foldable Structure with Torsional Buckling Pattern Reviewed
Sachiko Ishida, Yuto Sakamoto
Transactions of Japan Society of Spring Engineers 71 1 - 7 2026.3
-
Evaluation on shear modulus of cylindrical honeycomb core structures Reviewed
Kosuke Sekizawa, Sachiko Ishida
Transactions of the JSME (in Japanese) 91 ( 943 ) 25-00002 2025.3
-
Out-of-plane Crushing Characteristics of Bio-inspired Honeycomb Cores with Square Tubes Reviewed
Ben Yue, Sachiko Ishida, Kazuya Saito, Hiroshi Ookubo
Journal of Japan Society for Design Engineering 59 ( 6 ) 287 - 298 2024.6
-
Numerical modeling and modal analysis of base-isolated RC building Reviewed
Sachiko Ishida, Yukihiro Adachi, Mitsuo Notomi, and Toshiharu Arakawa
Transactions of the Japan Society of Mechanical Engineers 88 ( 910 ) 21-00372 2022.6
-
Performance Evaluation of Vibration Isolator Using Foldable Structure Under Hysteresis Effect Reviewed
Kouya Yamaguchi, Sachiko Ishida
Transactions of Japan Society of Spring Engineers 67 35 - 42 2022.3
-
Origami Engineering (4) ―Core Structures and Acoustics― Invited
Sachiko Ishida
Bulletin of the Japan Society for Industrial and Applied Mathematics 30 ( 4 ) 28 - 34 2020.12
-
Origami Engineering (3) ―Vibration Isolation by Using Deployable Structures― Invited
Sachiko Ishida
Bulletin of the Japan Society for Industrial and Applied Mathematics 30 ( 3 ) 29 - 35 2020.9
-
Design and Amplitude Dependence of Resonance Frequency of Origami-Inspired Vibration Isolators With Quasi-Zero-Stiffness Characteristic Reviewed International journal
Kouya Yamaguchi, Sachiko Ishida
Proceedings of ASME 2020 International Design Engineering Technical Conferences IDETC2020-22171 2020.8
-
Numerical analysis on rigidity of cylindrical honeycomb cores under radial loads Reviewed
Sachiko Ishida, Nur Asyikin binti Ahmad, and Koki Oka
Journal of Advanced Simulation in Science and Engineering 7 ( 1 ) 189 - 200 2020.7
-
Origami Engineering (2) ―Mechanics of Honeycomb Cores― Invited
Sachiko Ishida
Bulletin of the Japan Society for Industrial and Applied Mathematics 30 ( 2 ) 27 - 32 2020.6
-
Origami Engineering (1) ―Is origami useful?― Invited
Sachiko Ishida
Bulletin of the Japan Society for Industrial and Applied Mathematics 30 ( 1 ) 27 - 33 2020.3
-
Experimental Study on Folding Patterns and Deployability of Inflatable Structures Reviewed International journal
Sachiko Ishida, Hakimi Azuri
Proceedings of ASME 2019 International Design Engineering Technical Conferences IDETC2019- 98107 2019.8
-
Improved Feasible Load Range and Its Effect on the Frequency Response of Origami-inspired Vibration Isolators with Quasi-zero-stiffness Characteristics Reviewed International journal
Kazuya Inamoto, Sachiko Ishida
Transactions of ASME, Journal of Vibration and Acoustics 141 ( 2 ) 021004 2019.4
-
Acoustic properties of resonators using deployable cylinders Reviewed International journal
Sachiko Ishida, Ryo Matsuura
Methods and Applications for Modeling and Simulation of Complex Systems 946 372 - 381 2018.10
-
Improved Feasible Load Range and Its Effect on the Frequency Response of Origami-Inspired Vibration Isolators with Quasi-Zero-Stiffness Characteristics Reviewed International journal
Kazuya Inamoto, Sachiko Ishida
Proceedings of ASME 2018 International Design Engineering Technical Conferences DETC2018-85765 2018.8
-
Design of cylindrical honeycomb cores - Geometric consideration - Reviewed
Sachiko Ishida
Mechanical Engineering Journal 5 ( 4 ) 18-00147 2018.8
-
Design and Experimental Analysis of Origami-Inspired Vibration Isolator With Quasi-Zero-Stiffness Characteristic Reviewed
Sachiko Ishida, Kohki Suzuki, Haruo Shimosaka
JOURNAL OF VIBRATION AND ACOUSTICS-TRANSACTIONS OF THE ASME 139 ( 5 ) 2017.10
-
Vehicle energy absorbers consisting of foldable cylinders using response surface methodology Reviewed International journal
Yang Yang, Sachiko Ishida, Xilu Zhao, Ichiro Hagiwara
International Journal of Vehicle Performance 3 ( 4 ) 380 - 393 2017.5
-
Design and Numerical Analysis of Vibration Isolators with Quasi-zero-stiffness Characteristics Using Bistable Foldable Structures Reviewed International journal
Sachiko Ishida, Hiroshi Uchida, Haruo Shimosaka, Ichiro Hagiwara
Transactions of ASME, Journal of Vibration and Acoustics 139 ( 3 ) 031015 2017.4
-
Vibration-isolating Mechanism Using Origami-based Deployable Structures Invited
ISHIDA Sachiko
Journal of the Japan Society of Mechanical Engineers 119 ( 1175 ) 554 - 555 2016.10
-
Design and Engineering Application of Origami-based Deployable Structures Invited
Sachiko Ishida
Science of Origami 5 ( 1 ) 35 - 42 2016.3
-
Origami Design Method Using Conformal Maps Invited Reviewed
Sachiko Ishida, Ichiro Hagiwara
Ouyou Suri 26 ( 1 ) 15 - 21 2016.3
-
DESIGN CONCEPTS AND PROTOTYPES OF VIBRATION ISOLATORS USING BI-STABLE FOLDABLE STRUCTURES Reviewed
Sachiko Ishida, Hiroshi Uchida, Haruo Shimosaka, Ichiro Hagiwara
INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2015, VOL 5B DETC2015-46409 2016
-
Introduction to Mathematical Origami and Origami Engineering Reviewed
Sachiko Ishida, Ichiro Hagiwara
APPLICATIONS + PRACTICAL CONCEPTUALIZATION + MATHEMATICS = FRUITFUL INNOVATION 11 41 - 49 2016
-
DESIGN AND EXPERIMENTAL ANALYSIS OF ORIGAMI-INSPIRED VIBRATION ISOLATORS WITH QUASI-ZERO-STIFFNESS CHARACTERISTIC Reviewed
Sachiko Ishida, Kohki Suzuki, Haruo Shimosaka
PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2016, VOL 5B IDETC2016-59699 2016
-
Sound-Insulating Performance of Origami-Based Sandwich Trusscore Panels Reviewed
Sachiko Ishida, Hiroaki Morimura, Ichiro Hagiwara
Origami6 The Sixth International Meeting of Origami Science, Mathematics, and Education 2 431 - 438 2015.12
-
Regular Folding Pattern for Deployable Nonaxisymmetric Tubes Reviewed
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
JOURNAL OF MECHANICAL DESIGN 137 ( 9 ) 2015.9
-
Design of Deployable Membranes Using Conformal Mapping Reviewed
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
JOURNAL OF MECHANICAL DESIGN 137 ( 6 ) 061404 2015.6
-
Vibration isolators using nonlinear spring characteristics of origami-based foldable structures Reviewed
Sachiko ISHIDA, Hiroshi UCHIDA and Ichiro HAGIWARA
Transactions of the JSME 80 ( 820 ) DR0384 - DR0384 2014.12
-
Mathematical Approach to Model Foldable Conical Structures Using Conformal Mapping Reviewed
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
JOURNAL OF MECHANICAL DESIGN 136 ( 9 ) 091007 2014.9
-
A new method to compute sound transmission loss by acoustic FEM Reviewed
Sachiko Ishida, Hiroaki Morimura, Yo Goto, and Ichiro Hagiwara
Transactions of the Japan Society of Mechanical Engineers 80 ( 813 ) DR0127 2014.5
-
Origami-based Foldable Design Technique for Meandering Tubes by Using Conformal Transformation Reviewed
S. Ishida, T. Nojima, I. Hagiwara
Journals of the Japan Society for Industrial and Applied Mathematics 24 ( 1 ) 43 - 58 2014.3
-
REGULAR FOLDING PATTERN GENERATION FOR DEPLOYABLE NON-AXISYMMETRIC TUBES Reviewed
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2014, VOL 5B DETC2014-34595 2014
-
APPLICATION OF CONFORMAL MAPS TO ORIGAMI-BASED STRUCTURES: NEW METHOD TO DESIGN DEPLOYABLE CIRCULAR MEMBRANES Reviewed
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE, 2013, VOL 6B DETC2013-12725 2014
-
Modeling Techniques of Deployable Meandering Tubes Reviewed
S. Ishida, T. Nojima, I. Hagiwara
Transactions of the Japan Society of Mechanical Engineers, Series C 79 ( 808 ) 5117 - 5127 2013.12
-
S. Ishida, T. Nojima, I. Hagiwara
Transactions of the Japan Society of Mechanical Engineers, Series C 79 ( 801 ) 1561 - 1569 2013.5
-
Clothing skirt designed on conical truss model Reviewed
Eri Nakayama, Sachiko Ishida, Yu-Jing Liao, Ichiro Hagiwara
Advances in Manufacturing 1 ( 2 ) 130 - 135 2013
-
Conformal Transformation and Application to Origami Design of Conical Shells Reviewed
S. Ishida, T. Nojima, T. Kamei, I. Hagiwara
Journals of the Japan Society for Industrial and Applied Mathematics 22 ( 4 ) 301 - 318 2012.12
-
Consideration of Origami Design Clothing Reviewed
Eri Nakayama, Sachiko Ishida, Liao Yujing, Ichiro Hagiwara
SYSTEMS SIMULATION AND SCIENTIFIC COMPUTING, PT I 326 211 - 215 2012
-
3D Origami Structure Design and Simulation by Parametric Origami Module Reviewed
Yujing Liao, Xilu Zhao, Sachiko Ishida, Ichiro Hagiwara
SYSTEMS SIMULATION AND SCIENTIFIC COMPUTING, PT I 326 228 - + 2012
Books
-
Dynamic property of origami structures
（ Role： Joint author）
Asakura Publishing 2024.11
MISC
-
Diverse and functional designs of deployable structures: Application to vibration isolators Invited
Sachiko Ishida
Technical Reviews, JSSE Magazine 613 4 - 5 2022.10
-
Design and mechanical properties of origami-based honeycomb cores Invited
Sachiko Ishida
TEST, Quarterly information magazine of Japan Testing Machine Association 63 3 - 6 2022.4
Presentations
-
Experimental Comparison of Out-of-plane Crushing Characteristics of Bio-inspired Honeycomb Cores with Square Tubes
Mika Iwakami, Sachiko Ishida
2026.3
-
Development of Design and Fabrication Methods for Convex Tapes for Self-Deployable Membrane Structures with Logarithmic Spiral Configuration
Sota Higuchi, Sachiko Ishida
2026.3
-
Effects of Miura Folding-Based Variable Vortex Generator on the Flow Field
Asuka Chiba, Sachiko Ishida, Yoshitsugu Naka
2026.3
-
Mechanical properties of bio-inspired honeycomb cores with square tubes
Sachiko Ishida, Ryosuke Hayama
Finland-Japan Workshop in Industrial and Applied Mathematics 2026.1
-
Experimental and numerical evaluation of out-of-plane compressive properties of bio-inspired honeycomb cores
Guillaume Conte, Sachiko Ishida
Annual Conference 2025, Japan Society for Industrial and Applied Mathematics 2025.9
-
Mathematical study on shear stiffness of bio-inspired honeycomb cores
Ryosuke Hayama, Sachiko Ishida
Annual Conference 2025, Japan Society for Industrial and Applied Mathematics 2025.9
-
Shape parameter effect on turbulence and passive scalar transport characteristics in deployable pipe flows
Zen Fukuda, Yoshitsugu Naka, Sachiko Ishida
THMT-25 Turbulence, Heat and Mass Transfer 2025.7
-
円筒ハニカムコア構造を基にした新形状設計と応用への研究
関澤光亮,石田祥子
日本応用数理学会 若手の会 第10回学生研究発表会 2025.3 日本応用数理学会
-
角筒を有する生物模倣ハニカムコアの曲げ剛性評価
吉田真人,石田祥子
日本応用数理学会 若手の会 第10回学生研究発表会 2025.3 日本応用数理学会
-
展開構造を用いたヘルムホルツ共鳴器の消音試験
伊東温紀,石田祥子
日本応用数理学会 若手の会 第10回学生研究発表会 2025.3 日本応用数理学会
-
Flow Effects of a Variable Vortex Generator Using Miura Folding
Yutaro Seki, Sachiko Ishida, Yoshitsugu Naka
Japan Society for Industrical and Applied Mathematics 2025.3 Japan Society for Industrical and Applied Mathematics
-
Numerical analysis on triangulated cylinders with spiral configuration
Kenta Usui, Sachiko Ishida, Yoshitsugu Naka
Japan Society for Industrical and Applied Mathematics 2025.3 Japan Society for Industrical and Applied Mathematics
-
Experimental investigation of acoustic characteristics of Helmholtz resonator with deployable structure
Tatsuki Ishibashi, Sachiko ISHIDA
Japan Society for Industrical and Applied Mathematics 2025.3 Japan Society for Industrical and Applied Mathematics
-
Establishment of a Press Forming Method Applicable to Various Aluminum Core Panels
Ryosuke Morooka, Sachiko ISHIDA
Japan Society for Industrical and Applied Mathematics 2025.3 Japan Society for Industrical and Applied Mathematics
-
Theoretical and Experimental Evaluation on Shear Modulus of Bio-Inspired Honeycomb Cores With Square Tubes International conference
ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024) 2024.11 American Society of Mechanical Engineers
-
Numerical and Experimental Evaluation on Shear Modulus of Cylindrical Honeycomb Core Structures International conference
Kosuke Sekizawa, Sachiko Ishida
ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024) 2024.11 American Society of Mechanical Engineers
-
Experimental Evaluation on Flexural Rigidity of the Bio-Inspired Honeycomb Cores With Square Tubes International conference
Masato Yoshida, Sachiko Ishida
ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024) 2024.11 American Society of Mechanical Engineers
-
Decomposition Method for Helmholtz Resonators Using Origami-Inspired Deployable Cylinders International conference
Atsuki Ito, Sachiko Ishida
ASME 2024 International Mechanical Engineering Congress and Exposition (IMECE2024) 2024.11 American Society of Mechanical Engineers
-
Numerical Analysis and Experimental Evaluation on Shear Rigidity of Cylindrical Honeycomb Core Structures
Kosuke SEKIZAWA, Sachiko ISHIDA
The 17th International Symposium on Mechanics, Aerospace and Informatics Engineering 2024 2024.11 Jiangsu University, Gyeongsang National University, and Meiji University
-
Theoretical and Experimental Shear Characteristics of Bio-inspired Honeycomb Cores with Square Tubes
Ryosuke HAYAMA, Sachiko ISHIDA
The 17th International Symposium on Mechanics, Aerospace and Informatics Engineering 2024 2024.11 Jiangsu University, Gyeongsang National University, and Meiji University
-
The Effects of Square Tubes on Flexural Rigidity of the Bio-inspired Honeycomb Cores
Masato YOSHIDA, Sachiko ISHIDA
The 17th International Symposium on Mechanics, Aerospace and Informatics Engineering 2024 2024.11 Jiangsu University, Gyeongsang National University, and Meiji University
-
Origami Engineering Bridging Shapes and Dynamics Invited
Sachiko Ishida
The 17th International Symposium on Mechanics, Aerospace and Informatics Engineering 2024 2024.11 Jiangsu University, Gyeongsang National University, and Meiji University
-
Swirling flows in origami-inspired deployable tube with spiral configuration International conference
Sachiko Ishida, Ryoma Matsuda
JSST2024 & AsiaSim2024 The 43rd JSST Annual International Conference on Simulation Technology & The 23rd Asia Simulation Conference 2024.9 Japan Society for Simulation Technology
-
Feasibility Study on Helmholtz Resonators Using Deployable Structures
Sachiko Ishida, Ryo Watanabe
Annual Conference 2024, Japan Society for Industrial and Applied Mathematics 2024.9 Japan Society for Industrical and Applied Mathematics
-
Proposals for origami-inspired medical devices
Sachiko Ishida
2024.9 St. Marianna University School of Medicine and Meiji University
-
Vibration isolator using a two-layered bistable foldable structure with torsional buckling pattern
Sachiko Ishida, Yuto Sakamoto
Dynamics and Design 2024, Japan Society of Mechanical Engineers 2024.9 Japan Society of Mechanical Engineers
-
Acoustic Characterization of Helmholtz Resonators Using Origami-inspired Deployable Tubes International conference
Sachiko Ishida, Ryo Watanabe
12th International Design and Concurrent Engineering Conference (iDECON2024) 2024.9
-
Design and Fabrication of Quasi-isotropic Origami Metamaterials International conference
Sachiko Ishida, Xinyi Zhang, Guoxing Lu and Kohei Okayasu
The 8th International Conference on Origami in Science, Mathematics and Education (8OSME) 2024.7
-
Geometrical Design and Mechanical Properties of Origami-inspired Cylindrical Honeycomb Cores
Sachiko Ishida
Australia and New Zealand Industrial and Applied Mathematics (ANZIAM2024) 2024.2 Australian Mathematical Society
-
Mechanical Properties of Truncated-octahedron-based Metamaterials International coauthorship International conference
Sachiko Ishida, Xinyi Zhang, Guoxing Lu, and Kohei Okayasu
The 11th International Symposium on Impact Engineering (ISIE2023) 2023.12
-
Analysis on Swirl Flows Induced in Origami-Based Spiral Deployable Cylinders International conference
Ryoma Matsuda, Sachiko Ishida
ASME 2023 International Mechanical Engineering Congress and Exposition (IMECE2023) 2023.10 American Society of Mechanical Engineers
-
Performance of Vibration Isolators Using Two-Layered Foldable Structure Made of Sheet Material International conference
Yuto Sakamoto, Sachiko Ishida
ASME 2023 International Mechanical Engineering Congress and Exposition (IMECE2023) 2023.10 American Society of Mechanical Engineers
-
Origami Engineering: From Mathematics to Engineering Invited
Sachiko Ishida
STEM Blitz Seminar 2023.9 School of Science, Computing and Engineering Technologies and School of Engineering, Swinburne University of Technology
-
Numerical analysis for establishment of a muffing test method using Helmholtz resonator with deployable structure
Atsuki Ito, Sachiko Ishida
JSDE Autumn conference 2023 2023.9 Japan Society for Design Engineering
-
Impact energy absorption characteristics of bio-inspired honeycomb cores with extra hollows
Yue Ben, Sachiko Ishida, Toshitake Tateno
JSDE Autumn conference 2023.9 Japan Society for Design Engineering
-
The influence of design parameters on the shear modulus of the bio-inspired honeycomb cores with extra hollows
Ryosuke Hayama, Sachiko Ishida
Annual conference of Japan Society of Mechanical Engineers 2023.9 Japan Society of Mechanical Engineers
-
Experimental evaluation on shear modulus of cylindrical honeycomb core structures
Kosuke Sekizawa, Sachiko Ishida
Annual conference of Japan Society of Mechanical Engineers 2023.9 Japan Society of Mechanical Engineers
-
Designing self-deployable membranes integrated with elastic frames International conference
Sachiko Ishida
International Conference on Design and Concurrent Engineering & Manufacturing Systems Conference 2023 2023.9 Japan Society of Mechanical Engineering
-
Enhanced designability of honeycomb cores International conference
Sachiko Ishida
10th International Congress on Industrial and Applied Mathematics 2023.8 Japan Society for Industrial and Applied Mathematics
-
Production method of plastic bio-inspired honeycomb cores by hot press forming
Yuuki Tomioka, Sachiko Ishida
2023.3 Kanto Students Group, Japan Society of Mechanical Engineers
-
円筒ハニカムコア構造のせん断実験手法の提案
関澤光亮,石田祥子
日本応用数理学会2023年研究部会連合発表会 2023.3 日本応用数理学会
-
Evaluation of Shearing Properties of Bio-inspired Honeycomb Cores Using FEM
Ryosuke Hayama, Sachiko Ishida
Japan Society for Industrial and Applied Mathematics 2023.3 Japan Society for Industrial and Applied Mathematics
-
Science of Origami and Mechanical Engineering Invited
Sachiko Ishida
Materials and Mechanics Division, Japan Society of Mechanical Engineers 2023.3 Workshop for Multidisciplinary Collaboration, Materials and Mechanics Division, JSME
-
Out-of-plane Strength of Cylindrical Honeycomb Cores Invited International conference
Sachiko Ishida
The 17th Asia-Pacific Conference on Fracture and Strength 2022.12
-
Out-of-plane Compression Analysis on Cylindrical Honeycomb Cores
Sachiko Ishida
JSME CMD2022 2022.11 Japan Society of Mechanical Engineers
-
Vibration Isolation Performance of Vibration Isolators Using Foldable Structure Made of Face Material
Yuuto Sakamoto, Sachiko Ishida
2022.11 Japan Society of Spring Engineers
-
Extended Resonance Frequencies of Helmholtz Resonators Using Origami-inspired Deployable Cylinders Invited International conference
Ryo Watanabe, Sachiko Ishida
The 22nd International Symposium on Aerospace Technology & Manufacturing Process 2022.10 Korean Society of Manufacturing Process Engineers
-
Monozukuri-integrated practical seminar: Design and fabrication of deployable structures
Sachiko Ishida
The 32nd Design and Systems Conference 2022.9 Japan Society of Mechanical Engineers
-
切頂八面体を基にした多層コアパネルのエネルギ吸収特性
岡安晃平,石田祥子
日本応用数理学会2022年度年会 2022.9 日本応用数理学会
-
Acoustic Characterization of Helmholtz Resonators Using Origami-inspired Deployable Cylinders
Ryo Watanabe, Sachiko Ishida
Dynamics & Design Conference 2022, Japan Society of Mechanical Engineers 2022.9 Japan Society of Mechanical Engineers
-
Out-of-plane stiffness and strength of bio-inspired honeycomb cores with extra hollows International conference
Sachiko Ishida, Mudong Li, Kazuya Saito
JSST2022 International Conference on Simulation Technology 2022.9 Japan Society for Simulation Technology
-
Numerical evaluation on compressive properties of pyramidal shell structures representing rotational hinges
Kazuya Sugiura, Sachiko Ishida
Japan Society for Industrial and Applied Mathematics 2022.3 Japan Society for Industrial and Applied Mathematics
-
Evaluation on strength and engery absorption of bio-inspired honeycomb cores
BEN Yue, YAMAGUCHI Shunpei, ISHIDA Sachiko
Japan Society for Industrial and Applied Mathematics 2022.3 Japan Society for Industrial and Applied Mathematics
-
Spring properties and anti-vibration performance of isolation mechanism using two-layered foldable structures
Yuto Sakamoto, Sachiko Ishida
Japan Society for Industrial and Applied Mathematics 2022.3 Japan Society for Industrial and Applied Mathematics
-
Numerical Analysis on Laminar Flows in Deployable Structures with Spiral Patterns
Ryoma Matsuda, Sachiko Ishida
Japan Society for Industrial and Applied Mathematics 2022.3 Japan Society for Industrial and Applied Mathematics
-
Numerical and theoretical evaluation of out-of-plane stiffness of truss core panels International conference
Ryuto Asagami, Sachiko Ishida
The 21st International Symposium on Aerospace Technology & Manufacturing Process 2021.11 Korean Society of Manufacturing Process Engineers
-
Impact absorption characteristics of multi-layered core panels based on a truncated octahedron
Kohei Okayasu, Sachiko Ishida
JSME CMD2021 2021.9 Japan Society of Mechanical Engineers
-
Design and On-vehicle Test of Origami Tires
Kouya Yamaguchi, Ryuto Asagami, Kazuya Inamoto, Kenta Mizutani, Daigo Ito, Yingxue Bai, Hiromu Utada, Tomohiro Oishi, Jae Keun Jeon, Hikaru Sudo, Fareez Ameerul Bin Rosdi, Mohamad Imran Shah Bin Said Akbar and Sachiko Ishida
JSME D&S2021 2021.9 Japan Society of Mechanical Engineers
-
Numerical Modeling and Modal Analysis of Base-isolated RC Building
Sachiko ISHIDA, Chihiro ADACHI, Mitsuo NOTOMI, and Toshiharu ARAKAWA
Dynamics & Design Conference 2021, Japan Society of Mechanical Engineers 2021.9 Japan Society of Mechanical Engineers
-
Effects of Shapes of Deployable Cylinders on Acoustic Properties of Resonators
Ryo Watanabe, Makoto Hasome, Sachiko Ishida
JSME Dynamics & Design Conference 2021 2021.9 Japan Society of Mechanical Engineers
-
Evaluation on shear modulus of cylindrical honeycomb structures with different curvatures
Masaki Yamaguchi, Sachiko Ishida
JSIAM Annual conference 2021 2021.9 Japan Society for Industrial and Applied Mathematics
-
Application to anti-vibration table of two-layered foldable structure with torsional buckling pattern
Yingxue Bai, Sachiko Ishida
JSME Annual conference 2021 2021.9 Japan Society of Mechanical Engineers
-
Application to anti-vibration table of two-layered origami structures International conference
Yingxue Bai, Sachiko Ishida
JSST2021 International Conference on Simulation Technology 2021.9 Japan Society for Simulation Technology
-
Numerical evaluation on the out-of-plane properties of bio-inspired honeycomb cores with extra hollows International conference
Mudong Li, Sachiko Ishida, Kazuya Saito
JSST2021 International Conference on Simulation Technology 2021.9 Japan Society for Simulation Technology
-
Design and Fabrication of Self-deployable Structures by Using Spring Material
Sachiko Ishida, Tatsuya Matsubara
2022.6 Japan Society of Spring Engineers
-
Diverse and functional designs of deployable structures Invited
Sachiko Ishida
The 35th Social Meeting on Springs and the Related Technology 2022.3 Japan Society of Spring Engineers
-
Origami tire project 2019 and thereafter Invited
Sachiko Ishida
MIMS Research Meeting 2021.12 MIMS, Meiji University
-
Evaluation of Acoustic Properties of Helmholtz Resonators Using Deployable Cylinders
Ryo Watanabe, Makoto Hasome, Sachiko Ishida
2021.3 Kanto branch, Japan Society of Mechanical Engineers
-
Proposal of Numerical Modeling of Deployable Cylinders for Noise Reduction
Makoto Hasome, Ryo Watanabe, Sachiko Ishida
2021.3 Kanto branch, Japan Society of Mechanical Engineers
-
Geometry and mechanical properties of corepanels with different core arrangements
Kohei Okayasu, Sachiko Ishida
Japan Society for Industrial and Applied Mathematics 2021.3 Japan Society for Industrial and Applied Mathematics
-
Dynamics of honeycomb structures Invited
Sachiko Ishida
MIMS Research Meeting 2020.12 MIMS, Meiji University
-
Various engineering applications of deployable structures Invited
Sachiko Ishida
The 409th short study course, lecture series of JSPE 2020.11 Japan Society for Precision Engineering
-
Enhanced out-of-plane strength of bio-inspired honeycomb cores with extra hollows International conference
Mudong Li, Sachiko Ishida, Kazuya Saito
The 20th International Symposium on Aerospace Technology and Manufacturing Process 2020.11 Korean Society of Manufacturing Process Engineers
-
Effects of Design of Spring Mechanisms in Foldable Structure on Vibration Isolation
Kouya Yamaguchi, Sachiko Ishida
2020.10 Japan Society of Spring Engineers
-
トラスコアパネルの衝撃エネルギ吸収特性と座屈形状の関係
浅上 隆登,石田 祥子
日本応用数理学会2020年度年会 2020.9 日本応用数理学会
-
Transient response analysis of foldable structures with nonlinear spring characteristics
Kazuya Inamoto, Sachiko Ishida
Dynamics & Design Conference 2020, Japan Society of Mechanical Engineers 2020.9 Japan Society of Mechanical Engineers
-
Design and Amplitude Dependence of Resonance Frequency of Origami-Inspired Vibration Isolators With Quasi-Zero-Stiffness Characteristic International conference
Kouya Yamaguchi, Sachiko Ishida
ASME 2020 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference 2020.8 American Society of Mechanical Engineers
-
Impact energy absorption of honeycomb-shaped trusscore panels
Ryuto Asagami, Sachiko Ishida
Japan Society for Industrial and Applied Mathematics 2020.3 Japan Society for Industrial and Applied Mathematics
-
Design and evaluation of energy absorbing structures subject to inversion deformation
Daigo Ito, Sachiko Ishida
Japan Society for Industrial and Applied Mathematics 2020.3 Japan Society for Industrial and Applied Mathematics
-
Design and performance evaluation of vibration isolators using bistable foldable structures
Kouya Yamaguchi, and Sachiko Ishida
Japan Society for Industrial and Applied Mathematics 2020.3 Japan Society for Industrial and Applied Mathematics
-
Numerical analysis of cylindrical honeycomb cores International conference
Sachiko Ishida, Nur Asyikin binti Ahmad, Kohki Oka
JSST2019 International Conference on Simulation Technology 2019.11 Japan Society for Simulation Technology
-
Manufacturing Process and On-vehicle Test of Paper Honeycomb Tires Based on Origami Invited International conference
Yingxue Bai, Daigo Ito, Jae Keun Jeon, Fareez Ameerul Bin Rosdi, Sachiko Ishida
The 19th International Symposium on Aerospace Technology and Manufacturing Process 2019.10 Korean Society of Manufacturing Process Engineers
-
Spring Characteristics of Vibration Isolator Using Foldable Sturcture with Air Suspension Mechanism
Kazuya Inamoto, Sachiko Ishida
The 14th International Symposium on Mechanics, Aerospace and Informatics Engineering 2019 2019.9 Gyeongsang National University, Korea and Meiji University, Japan
-
Numerical Analysis of Inner Flow Characteristic in a Folding Pipe
Kenta Mizutani, Yoshitsugu Naka, Sachiko Ishida
The 14th International Symposium on Mechanics, Aerospace and Informatics Engineering 2019 2019.9 Gyeongsang National University, Korea and Meiji University, Japan
-
Experimental analysis of strength of cylindrical honeycomb cores
Ryuto Asagami, Kazuya Inamoto, Hiromu Utada, Hikaru Sudo, Sachiko Ishida
The 14th International Symposium on Mechanics, Aerospace and Informatics Engineering 2019 2019.9 Gyeongsang National University, Korea and Meiji University, Japan
-
Design and On-vehicle Test of Paper Honeycomb Tires Based on Origami
Yingxue Bai, Daigo Ito, Jae Keun Jeon, Fareez Ameerul Bin Rosdi, Sachiko Ishida
The 14th International Symposium on Mechanics, Aerospace and Informatics Engineering 2019 2019.9 Gyeongsang National University, Korea and Meiji University, Japan
-
Design and Energy Absorption of Folding Pyramidal Shell Structures
Daigo Ito, Sachiko Ishida
The 14th International Symposium on Mechanics, Aerospace and Informatics Engineering 2019 2019.9 Gyeongsang National University, Korea and Meiji University, Japan
-
Study on stiffness and strength of core structures with different core shapes
Kouya Yamaguchi, Kenta Mizutani, Tomohiro Oishi, Mohamad Imran Shah Bin Said Akbar, Sachiko Ishida
The 14th International Symposium on Mechanics, Aerospace and Informatics Engineering 2019 2019.9 Gyeongsang National University, Korea and Meiji University, Japan
-
Study on stiffness and streangth of core structures with different core shapes
Kouya Yamaguchi, Kenta Mizutani, Tomohiro Oishi, Mohamad Imran, Shah Bin Said Akbar, Sachiko Ishida
The 14th International Symposium on Mechanics, Aerospace and Informatics Engineering 2019 2019.9 Gyeongsang National University, Korea and Meiji University, Japan
-
Mechanical Properties of Cylindrical Honeycomb Cores under Internal Pressures
2019.8 Japan Society of Mechanical Engineers
-
Experimental Study on Folding Patterns and Deployability of Inflatable Structures International conference
Sachiko Ishida, Hakimi Azuri
ASME 2019 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference 2019.8 American Society of Mechanical Engineers
-
Design of Folding Structures for Improving Energy-Absorbing Performance International conference
Daigo Ito, Sachiko Ishida
9th International Congress on Industrial and Applied Mathematics 2019.7 International Council for Industrial and Applied Mathematics
-
Origami Engineering: Application of Paper-made Honeycomb Cores International conference
Sachiko Ishida
9th International Congress on Industrial and Applied Mathematics 2019.7 International Council for Industrial and Applied Mathematics
-
Numerical Evaluation on Flow Characteristic in a Folding Pipe International conference
Kenta Mizutani, Sachiko Ishida, Yoshitsugu Naka
9th International Congress on Industrial and Applied Mathematics 2019.7 International Council for Industrial and Applied Mathematics
-
Design of Vibration Isolator Using Foldable Structure and Air Spring International conference
Kazuya Inamoto, Sachiko Ishida
9th International Congress on Industrial and Applied Mathematics 2019.7 International Council for Industrial and Applied Mathematics
-
折り畳み構造と空気ばねを用いた防振機構
稲本知也,石田祥子
日本ばね学会2019年度春季ばね及び復元力応用講演会 2019.6 日本ばね学会
-
Origami × Mechanical Engineering: Introduction to Origami-based Vibration Isolator Invited
Sachiko Ishida
OIST workshop on Origami and Deployable Mechanisms 2019.5 Okinawa Institute of Science and Technology
-
Dynamics of Origami and Tires Invited
2019.4 Meiji University
-
エネルギ吸収量向上のための折畳構造の圧潰特性の研究
伊藤大悟,石田祥子
日本応用数理学会 2019年研究部会連合発表会 2019.3 日本応用数理学会
-
折り畳み構造内流れの特性評価
水谷建太,中吉嗣,石田祥子
日本応用数理学会 2019年研究部会連合発表会 2019.3 日本応用数理学会
-
折り畳み構造を利用した防振機構における空気ばねの応用
稲本知也,石田祥子
日本応用数理学会 2019年研究部会連合発表会 2019.3 日本応用数理学会
-
Acoustic properties of resonators using deployable cylinders International conference
Sachiko Ishida, Ryo Matsuura
18th Asia Simulation Conference 2018.10 Japan Society for Simulation Technology
-
Fundamental study on acoustic properties of resonators using deployable cylinders International conference
Sachiko Ishida, Ryo Matsuura
JSST2018 International Conference on Simulation Technology 2018.9 Japan Society for Simulation Technology
-
Extension of Load Range and Performance Evaluation of Origami-Inspired Vibration Isolators with Quasi-Zero-Stiffness Characteristics
Kazuya Inamoto, Sachiko Ishida
The 13th International Symposium on Mechanics, Aerospace and Informatics Engineering 2018 2018.9 Meiji University, Japan and Gyeongsang National University, Korea
-
Optimum Design for Inflatable Structure
Hakimi Azuri, Sachiko Ishida
The 13th International Symposium on Mechanics, Aerospace and Informatics Engineering 2018 2018.9 Meiji University, Japan and Gyeongsang National University, Korea
-
Energy Absorption Characteristic of Folding Pyramidal Shell Structures
Daigo Ito, Sachiko Ishida
The 13th International Symposium on Mechanics, Aerospace and Informatics Engineering 2018 2018.9 Meiji University, Japan and Gyeongsang National University, Korea
-
Geometric Consideration to Design of Cylindrical Honeycomb Cores
2018.9 Japan Society of Mechanical Engineers
-
Improved Feasible Load Range and Its Effect on the Frequency Response of Origami-Inspired Vibration Isolators with Quasi-Zero-Stiffness Characteristics International conference
Kazuya Inamoto, Sachiko Ishida
ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference 2018.8 American Society of Mechanical Engineers
-
Deployable Core Structures Invited
2018.8
-
折り畳み構造を利用した防振機構の荷重範囲の拡張と周波数特性
稲本 知也, 石田 祥子
日本応用数理学会 2018年研究部会連合発表会 2018.3 日本応用数理学会
-
環状折り畳み構造の展開図作成法と剛性検証
海野 真誼, 石田 祥子
日本応用数理学会 2018年研究部会連合発表会 2018.3 日本応用数理学会
-
非線形ばね特性を持つ折畳構造を利用した防振機構モデルの開発
稲本知也,石田祥子
日本ばね学会2017年度秋季ばね及び復元力応用講演会 2017.11 日本ばね学会
-
Shape optimization of truss core panels for energy absorption performance International conference
Sota Inoue, Sachiko Ishida
JSST2017 International Conference on Simulation Technology 2017.10 Japan Society for Simulation Technology
-
折紙の展開収縮構造を用いた防振機構 Invited
石田祥子
日本機械学会 耐震問題研究会 2017.10 日本機械学会 耐震問題研究会
-
Numerical Evaluation of Impact Energy Absorption Characteristics of Truss Core Panels International conference
Sota Inoue, Sachiko Ishida
The 4th International Conference on Design Engineering and Science 2017.9
-
展開構造の力学的特性に関する考察
日本応用数理学会2017年度年会 2017.9 日本応用数理学会
-
Performance Evaluation of Vibration Isolators Using Cylindrical Foldable Structures with Bistability
Kazuya Inamoto, Sachiko Ishida
The 12th International Symposium on Mechanics, Aerospace and Informatics Engineering 2017 2017.9 Meiji University, Japan and Gyeongsang National University, Korea
-
折紙の工学応用―折紙に秘められた可能性― Invited
生産システム懇談会 2017.1
-
折紙の数理と構造設計 Invited
数学と現象 in Miyazaki (MPM2016) 2016.11 宮崎大学
-
Principle and experimental evaluation of origami-inspired vibration isolators Invited
International Conference on Mathematical Modeling and Applications 2016 'Origami-Based Modeling and Analysis' 2016.11 International Center of Mathematical Modeling and Applications, Meiji University
-
双安定な展開収縮構造の除振性能
日本機械学会 2016年度年次大会 2016.9 日本機械学会
-
斜め荷重を考慮した展開可能なコア構造に関する検討
日本応用数理学会2016年度年会 2016.9 日本応用数理学会
-
Design and Experimental Analysis of Origami-inspired Vibration Isolators with Quasi-zero-stiffness Characteristic International conference
Sachiko Ishida, Kohki Suzuki, and Haruo Shimosaka
ASME 2016 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference 2016.8 American Society of Mechanical Engineers
-
Geometrical Design of Deployable Core Structures
Spring Conference of JSDE2016 2016.5 Japan Society for Design Engineering
-
折紙の数理と工学への応用 Invited
武蔵野大学 数理工学シンポジウム2015 2015.11 武蔵野大学
-
双安定な折り畳み円筒構造を利用した防振器の設計 Invited
日本自動車技術会 振動騒音部門委員会 2015.11 日本自動車技術会
-
部材の弾性変形を活かした折りたたみ式防振機構 Invited
文部科学省 現象数理学共同研究協働拠点研究集会「文理融合を目指した折紙科学研究」 2015.11
-
Design Concepts of Displacement Amplification Mechanism Using Folding Patterns of Origami International conference
International Conference on Simulation Technology 2015 2015.10 Japan Society for Simulation Technology
-
Geometrical Study on the Shape Adaptability of Deployable Structures Composed of Plastic Materials
Autumn Conference of JSDE2015 2015.10 Japan Society for Design Engineering
-
Folding Origami/Jongie Jupgi: From Mathematics to Engineering
The 10th International Symposium on Mechanics, Aerospace and Informatics Engineering 2015 2015.9 Meiji University, Japan and Gyeongsang National University, Korea
-
Manufacture and Evaluation of the Vibration Proof Structure Using Bistability of Cylindrical Folding Model
Kohki Suzuki, Sachiko Ishida, Haruo Shimosaka
The 10th International Symposium on Mechanics, Aerospace and Informatics Engineering 2015 2015.9 Meiji University, Japan and Gyeongsang National University, Korea
-
展開収縮可能な湾曲した筒構造の幾何学的形状変化に関する考察
日本応用数理学会2015年度年会 2015.9 日本応用数理学会
-
折り畳み可能な構造の機械的特性の計測とその考察
日本機械学会 Dynamics & Design Conference 2015 2015.8 日本機械学会
-
Design Concepts and Prototypes of Vibration Isolators Using Bi-stable Foldable Structures International conference
Sachiko Ishida, Hiroshi Uchida, Haruo Shimosaka, Ichiro Hagiwara
ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference 2015.8 American Society of Mechanical Engineers
-
Approach to Design of Mechanical Devices Using Foldable Structures Invited
CMMA Monthly Seminar 2015.7 Center for Mathematical Modeling and Applications, Meiji University
-
円筒折り畳み構造物の双安定性を利用した防振機構モデルの製作
鈴木昂輝,石田祥子,下坂陽男
日本設計工学会2015年春季研究発表講演会 2015.5 日本設計工学会
-
Shape Optimization of Energy Absorbers Consisting of Foldable Cylinders Using Response Surface Methodology International conference
Sachiko Ishida, Yang Yang, Xilu Zhao, Ichiro Hagiwara
The 4th Korea-Japan Joint Symposium on Dynamics & Control 2015.5 Korean Society of Mechanical Engineers, Japan Society of Mechanical Engineers
-
Prototypes of Foldable Structures and Verification of Bistable Properties
Workshops Joint Conference 2015, Japan Society for Industrial and Applied Mathematics 2015.3 Japan Society for Industrial and Applied Mathematics
-
Vibration Isolators using Bi-stability of Deployable Structures - Future Prospects of Origami Engineering- Invited
2015.1 Center for Mathematical Modeling and Applications
-
折紙の数理とその工学応用 Invited
駿台懇話会 連合駿台会学術奨励賞受賞記念講演会 2015.1 連合駿台会
-
Nonlinear Spring Characteristic of Foldable Structures and its Application to Engineering
Sachiko Ishida, Hiroshi Uchida, Ichiro Hagiwara
JSSE Autumn Lecture Meeting 2014 2014.11 Japan Society of Spring Engineers
-
Origami Evolution from Mathematics to Engineering Invited
Forum "Math-for-Industry" 2014 2014.10 Institute of Mathematics for Industry, Kyushu University
-
Displacement amplification mechanism based on folding patterns of origami Invited
The 67th ICAT/JTTAS Joint International Smart Actuator Symposium 2014.9 The Pennsylvania State University
-
Application of mathematical origami to engineering: Vibration isolator using bistability of foldable structures
Sachiko Ishida, Hiroshi Uchida, Ichiro Hagiwara
Annual Conference 2014, Japan Society for Industrial and Applied Mathematics 2014.9 Japan Society for Industrial and Applied Mathematics
-
Approach to New Vibration Isolators Using Origami-Based Foldable Structures
Sachiko Ishida, Hiroshi Uchida, Ichiro Hagiwara
JSME Dynamics & Design Conference 2014 2014.8 Japan Society for Mechanical Engineers
-
Regular Folding Pattern Generation for Deployable Non-Axisymmetric Tubes International conference
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference 2014.8 American Society of Mechanical Engineers
-
Origami-based Modeling Techniques for Deployable Meandering Tubes International conference
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
The 6th International Meeting on Origami in Science, Mathematics and Education 2014.8 The Japan Origami Academic Society (JOAS)
-
Sound Insulating Performance on Origami-based Sandwich Trusscore Panels International conference
Sachiko Ishida, Hiroaki Morimura, Ichiro Hagiwara
The 6th International Meeting on Origami in Science, Mathematics and Education 2014.8 The Japan Origami Academic Society (JOAS)
-
Bi-stability of Origami-based Structures and its Application to Mechanical Design Invited
Sachiko Ishida, Hiroshi Uchida, Taketoshi Nojima and Ichiro Hagiwara
US-Japan Workshop on Soft Matter based Active Materials and Tactile Sensing and Their Integrated Systems 2014.5 University of Washington, AIST, and Nabtesco Corp.
-
Evaluation of Sound Insulating Performance of High-Rigid Sandwich Panels Invited
2014.3 Ministry of Education, Culture, Sports, Science and Technology, and Meiji Institute for Advanced Study of Mathematical Sciences
-
Lightweight High-rigid Origami Structures based on Cell Structures in Nature Invited
S. Ishida and K. Saito
2014.2 Institute of statistical Mathematics, and Meiji Institute for Advanced Study of Mathematical Sciences
-
Inspiration from Japanese Traditional Art! : Origami's Techniques to Fold up Meandering Tubes
New Technology Meeting by Ryukoku Univ. and Meiji Univ. 2013.12 Japan Science and Technology Agency (JST)
-
Origami Science and its Application to Engineering Invited
The 3rd Computational Dynamics Symposium 2013.12 Science Council of Japan (JSC)
-
Inflatable Product Design Based on Origami Theory International conference
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
the 5th Asia Pacific Congress on Computational Mechanics (APCOM 2013) & 4th International Symposium on Computational Mechanics (ISCM 2013) 2013.12 Asia-Pacific Association for Computational Mechanics (APACM), International Association for Computational Mechanics (IACM), Association for Computational Mechanics (SACM, Singapore), International Centre for Applied Mechanics (XJTU, China)
-
Folding in Nature and its Application to Engineering International conference
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
International Conference on Mathematical Modeling and Application (ICMMA2013) 2013.11 Center for Mathematical Modeling and Application (CMMA), Meiji University
-
Conformal Transformation and Deployable Structures Invited
the 66th ICAT/JTTAS Joint International Smart Actuators/Sensors Symposium 2013.10 Penn State University
-
Attraction of Applied Mathematics and Career Paths Invited
D. Takahashi, K. Takashima, A. Takada, S. Ishida
Panel Discussion, Annual Conference of JSIAM2013 2013.9 Japan Society for Industrial and Applied Mathematics
-
Design Techniques for Deployable Meandering Tubes International conference
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
JSST2013 International Conference on Simulation Technology 2013.9 Japan Society for Simulation Technology
-
Conformal Maps and Modeling of Deployable Toroidal Structures
S. Ishida, T. Nojima, I. Hagiwara
Annual Conference of JSIAM2013 2013.9 Japan Society for Industrial and Applied Mathematics
-
Inverse problem on origami: Folding patterns and regularity to form foldable toroidal surfaces
S. Ishida, T. Nojima, I. Hagiwara
Annual Conference of JSIAM2013 2013.9 Japan Society for Industrial and Applied Mathematics
-
Development of New Perturbation Method with Complementary Terms International conference
Sachiko Ishida, Xilu Zhao, Ichiro Hagiwara
JSST2013 International Conference on Simulation Technology 2013.9 Japan Society for Simulation Technology
-
Application of Conformal Maps to Origami-Based Structures: New Method to Design Deployable Circular Membranes International conference
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
ASME 2013 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference 2013.8 American Society of Mechanical Engineers
-
Performance Evaluation of Sound Insulation of Trusscore Panels
S. Ishida, H. Morimura, I. Hagiwara
JSME Dynamics & Design Conference 2013 2013.8 Japan Society of Mechanical Engineers
-
Origami's Geometry and Structure Design Invited
The 1st MIMS Seminar for Origami and Computational Sciences 2013.7 Center for Mathematical Modeling and Application (CMMA)
-
Sound Insulating Performance of Trusscore Panels Invited
Committee of Vibration and Noise Division, Society of Automative Engineers of Japan 2013.7 Society of Automative Engineers of Japan
-
Sound Insulation Characteristics of Trusscore Panels Invited
The 1st RC259 Meeting 2013.1 Japan Society of Mechanical Engineers, and Meiji University
-
Conformal Maps and Application to Origami Invited
2012.11 Ministry of Education, Culture, Sports, Science and Technology, Meiji Institute for Advanced Study of Mathematical Sciences
-
Systematic Technique to Model Origami Structures by Using Conformal Maps International conference
Sachiko Ishida, Taketoshi Nojima, Ichiro Hagiwara
Asia Simulation Conference & the International Conference on System Simulation and Scientific Computing 2012.10 Asia Simulation Societies: CASS, JSST and KSS
-
Improvements of the perturbation method with complementary terms for generalization
S. Ishida, X. Zhao, I. Hagiwara
JSME Computational Mechanics Division Conference 2012.10 Japan Society of Mechanical Engineers
-
Conformal Transformation and Application to Origami Designing
S. Ishida, T. Nojima, I. Hagiwara
Japan Society of Mechanical Engineers, Dynamics & Design Conference 2012 2012.9 Japan Society of Mechanical Engineers
-
Mathematical Approach to Origami Design: Application of Conformal Transformation
S. Ishida, T. Nojima, I. Hagiwara
Annual Conference 2012, Japan Society for Industrial and Applied Mathematics 2012.8 Japan Society for Industrial and Applied Mathematics
-
Development of new optimization technology using perturbation method with complementary terms
S. Ishida, X. Zhao, I. Hagiwara
JSST2011 2011.10 Japan Society for Simulation Technology
-
Bifurcation of the flow between two vertical parallel plates with a constant temperature gradient
S. Ishida, M. Nagata
JSFM Annual Meeting 2003 2003.7 Japan Society of Fluid Mechanics
-
Bifurcation of the flow between two vertical parallel plates with a constant temperature gradient International conference
Sachiko Ishida, Masato Nagata
British Applied Mathematics Colloquium 2003 2003
Industrial property rights
-
Honeycomb structures
-
Fabrication methods of honeycomb structures
Kazuya Saito, Sachiko Ishida, Mudong Li
-
New bio-inspired honeycomb cores with enhanced mechanical properties and their production techniques
Kazuya Saito, Sachiko Ishida, Mudong Li
-
Fuel vapor adsorption filter for internal combustion engine and intake duct structure for internal combustion engine
Tomohiro Yoshida, Tetsuya Kuno, Junji Hattori, Yoshinori Inuduka, Sachiko Ishida
-
Fuel vapor adsorption filter for internal combustion engine and intake duct structure for internal combustion engine
Tomohiro Yoshida, Tetsuya Kuno, Junji Hattori, Yoshinori Inuduka, Sachiko Ishida
-
Nonlinear springs and anti-vabration devices
Ichiro Hagiwara, Sachiko Ishida, Hiroshi Uchida
-
Deployable tubes, Fabrication method and devices for deployable structures
Ichiro Hagiwara, Sachiko Ishida, Taketoshi Nojima
Works
-
Exhibition of cylindrical honeycomb cores at Messe Nagoya 2024
OUTSENSE Inc. and Ishida Laboratory of Meiji University
2024.10 - 2024.11
-
Foreword: To be sustainable JSIAM
Sachiko Ishida
2024.9
-
Demonstration of origami honeycomb tires
2024.8
-
Origami tires: Ultimate challenge to mathematical & mechanical study on paper-made honeycomb tires
Sachiko Ishida
2023.8
-
Design and mechanical properties of origami-based honeycomb cores
Sachiko Ishida
2022
-
Book review "Introduction to optimum design (Jasbir S. Arora, Academic Press)"
Sachiko Ishida
2018.12
-
Minute of the 6th International Meeting on Origami in Science, Mathematics and Education (6OSME)
2015.3
Awards
-
Outstanding Presentation Award, JSST2024 International Conference on Simulation Technology
2024.11 Japan Society for Simulation Technology Swirling flows in origami-inspired deployable tube with spiral configuration
Sachiko Ishida
-
ISATMP-22 Best Oral Presentation Award
2022.10 The 22nd International Symposium on Aerospace Technology and Manufacturing Process Extended Resonance Frequencies of Helmholtz Resonators Using Origami-inspired Deployable Cylinders
Ryo Watanabe, Sachiko Ishida
-
Best Poster Award 2022
2022.6 Japan Society of Spring Engineers Design and Fabrication of Self-deployable Structures by Using Spring Material
Sachiko Ishida, Tatsuya Matsubara
-
JSPS Prize in FY2021
2021.12 Japan Society for the Promotion of Science
Sachiko Ishida
-
ISATMP-21 Best Oral Presentation Award
2021.11 The 21st International Symposium on Aerospace Technology and Manufacturing Process Numerical and theoretical evaluation of out-of-plane stiffness of truss core panels
Ryuto Asagami, Sachiko Ishida
-
ISATMP-20 Best Oral Presentation Award
2020.11 The 20th International Symposium on Aerospace Technology and Manufacturing Process, Korean Society of Manufacturing Process Engineers Enhanced out-of-plane strength of bio-inspired honeycomb cores with extra hollows
Mudong Li, Sachiko Ishida, Kazuya Saito
-
Outstanding Presentation Award, JSST2019 International Conference on Simulation Technology
2020.5 Japan Society for Simulation Technology Numerical analysis of cylindrical honeycomb cores
Sachiko Ishida
-
Hisao Hasegawa Award for Outstanding Research Achievement 2019
2020.4 The Steering Committee of Hisao Hasegawa Fund Design of Cylindrical Honeycomb Cores -Geometric Consideration-
Sachiko Ishida
-
ICIAM2019 Best Industry-related Poster Award (2nd Prize)
2019.7 9th International Congress on Industrial and Applied Mathematics (ICIAM2019) Origami Engineering: Application of Paper-made Honeycomb Cores
Sachiko Ishida
-
Outstanding Poster Award, JSSE2019
2019.6 Japan Society of Spring Engineers
Kazuya Inamoto, Sachiko Ishida
-
Dynamics, Measurement and Control Award for Pioneering Achievement
2016.8 Dynamics, Measurement and Control Division, Japan Society of Mechanical Engineers
Sachiko Ishida
-
The Young Scientists' Prize, The Commendation for Science and Technology by the Minister of Education, Culture, Sports, Science and Technology
2016.4 Ministry of Education, Culture, Sports, Science and Technology
Sachiko Ishida
-
Outstanding Presentation Award, JSST2015 International Conference on Simulation Technology
2016.1 Japan Society for Simulation Technology Design Concepts of Displacement Amplification Mechanism Using Folding Patterns of Origami
Sachiko Ishida
-
10th Wakashachi Encouragement Award (category: applied research), Award of Excellence
2016.1 Aichi Prefecture, Aichi Science & Technology Foundation, Hibi Science Foundation
Sachiko Ishida
-
Best Paper Award 2014 of Japan Society of Mechanical Engineers
2015.4 Japan Society of Mechanical Engineers Modeling Techniques of Deployable Meandering Tubes
S. Ishida, T. Nojima, I. Hagiwara
-
Excellent Research Achievements Award, Hisao Hasegawa Award 2014
2015.4 The Steering Committee of Hisao Hasegawa Fund
Sachiko Ishida
-
The 21st Young Researcher's Award, Rengo Sundai Kai
2015.1 Rengo Sundai Kai Conformal Transformation and Application to Origami Design of Conical Shells
Sachiko Ishida
-
Poster Award 2014
2014.9 Japan Society for Industrial and Applied Mathematics Application of mathematical origami to engineering: Vibration isolator using bistability of foldable structures
Sachiko Ishida, Hiroshi Uchida, Ichiro Hagiwara
-
Best Paper Award 2014 (Category: Application)
2014.9 Japan Society for Industrial and Applied Mathematics Conformal Transformation and Application to Origami Design of Conical Shells
S. Ishida, T. Nojima, T. Kamei, I. Hagiwara
-
Outstanding Presentation Award, JSST2013 International Conference on Simulation Technology
2014.1 Japan Society for Simulation Technology Development of New Perturbation Method with Complementary Terms
Sachiko Ishida
-
Selected representative of Japan Society for Industrial and Applied Mathematics in the 3rd Symposium of Computational Dynamics
2013.12 Science Council of Japan
Sachiko Ishida
-
Outstanding Poster Award 2013
2013.9 Japan Society for Industrial and Applied Mathematics Inverse problem of origami: folding pattern and regularity of foldable winding tubes
S. Ishida, T. Nojima, I. Hagiwara
-
Outstanding Presentation Award 2012
2012.10 Japan Society for Industrial and Applied Mathematics Mathematical Approach to Origami Design: Application of Conformal Transformation
Sachiko Ishida
Research Projects
-
Anti-vibration mechanism using origami structures
2025.4
Authorship：Principal investigator Grant type：Collaborative (industry/university)
-
Origami Engineering Bridging Shape and Dynamics
2024.4 - 2027.3
Japan Society for the Promotion of Science Grant-in-Aid for Transformative Research Areas (B)
Authorship：Principal investigator
-
Origami Bridging Science, Art, and Industry
Grant number：24H00821 2024.4 - 2027.3
Japan Society for the Promotion of Science Grants-in-Aid for Scientific Research Grant-in-Aid for Transformative Research Areas (B)
Grant amount：\31460000 （ Direct Cost: \24200000 、 Indirect Cost：\7260000 ）
-
Application of origami-inspired structures to vehicle elements
2022.12 - 2025.3
Sachiko Ishida
Authorship：Principal investigator Grant type：Collaborative (industry/university)
Grant amount：\1100000 （ Direct Cost: \1000000 、 Indirect Cost：\100000 ）
-
Design of mechanical properties of core structures based on science of origami
2021.4 - 2024.3
Japan Society for the Promotion of Science Grant-in-Aid for Scientific Research(C)
Sachiko Ishida
Authorship：Principal investigator
Grant amount：\3360000 （ Direct Cost: \2730000 、 Indirect Cost：\630000 ）
-
Design of Mechanical Properties of Origami-based Core Structures
2020.6 - 2021.3
Institute of Science and Technology, Meiji University Prioritized Research B
Authorship：Principal investigator Grant type：Competitive
Grant amount：\2452000 （ Direct Cost: \2452000 ）
-
Rigidity and Self-deployability of Origami-based Core Structures
2019.4 - 2020.3
Takahashi Industrial and Economic Research Foundation
Sachiko Ishida
Authorship：Principal investigator Grant type：Competitive
Grant amount：\1200000 （ Direct Cost: \1100000 、 Indirect Cost：\100000 ）
-
Mathematical Design and Evaluation of Mechanical Characteristics on Rigid Panels
2017.9 - 2018.8
Research grant, Nikki-Saneyoshi scholarship foundation
Authorship：Principal investigator Grant type：Competitive
Grant amount：\2200000 （ Direct Cost: \2000000 、 Indirect Cost：\200000 ）
-
Study on origami-based container design for liquid transfer
2017.6 - 2018.3
Commissioned research
Sachiko Ishida
Authorship：Principal investigator Grant type：Collaborative (industry/university)
Grant amount：\522720 （ Direct Cost: \475200 、 Indirect Cost：\47520 ）
-
Shape Optimization and Performance Evaluation of Vibration-proof Mechanism Using Origami-inspired Structures
2017.4 - 2020.3
Japan Society for the Promotion of Science Grant-in-Aid for Young Scientists (B)
Authorship：Principal investigator
Grant amount：\3680000 （ Direct Cost: \2990000 、 Indirect Cost：\690000 ）
-
Shape Optimization of Deployable Structures Based on Mathematics of Origami
2015.6 - 2016.5
Shiseido Co., Ltd. The 8th Shiseido Female Reserchers Science Grant
Authorship：Principal investigator Grant type：Competitive
Grant amount：\1100000 （ Direct Cost: \1000000 、 Indirect Cost：\100000 ）
-
Travel Support for International Conference
2015.5
The Japan Science Society
Authorship：Principal investigator Grant type：Competitive
Grant amount：\68000 （ Direct Cost: \68000 ）
-
Investigation of Mechanical Characteristic of Deployable Structures and its Application to Engineering
2015.4 - 2017.3
Japan Society for the Promotion of Science Grant-in-Aid for Young Scientists (B)
Authorship：Principal investigator
Grant amount：\3040000 （ Direct Cost: \2470000 、 Indirect Cost：\570000 ）
-
「3D折紙式プリンターシステム」構築のための折り易い展開図とロボットの開発
2015.4 - 2016.3
基盤研究(A)
-
Application of Folding Techniques to Design of Vehicle Elements
2015.3 - 2016.2
Commissioned research
Authorship：Principal investigator Grant type：Collaborative (industry/university)
Grant amount：\594000 （ Direct Cost: \540000 、 Indirect Cost：\54000 ）
-
Grant for attending the international conference
2014.8
Suzuki Foundation Grant for overseas training 2014
Authorship：Principal investigator Grant type：Competitive
Grant amount：\240000 （ Direct Cost: \240000 ）
-
Grasp of Mechanical Characteristics of Foldable Structures and Application to Engineering
2014.6 - 2015.3
Meiji University Grant for Young Researchers 2014, Meiji University
Authorship：Principal investigator Grant type：Competitive
Grant amount：\675000 （ Direct Cost: \675000 ）
-
Grant for attending the international conference
2013.12
Society for Promotion of Space Science Grant for attending the international conference 2013
Authorship：Principal investigator Grant type：Competitive
Grant amount：\160000 （ Direct Cost: \160000 ）
-
Grant for attending the international symposium
2013.9
Marubun Research Promotion Foundation Grant for international exchange 2013
Authorship：Principal investigator Grant type：Competitive
Grant amount：\200000 （ Direct Cost: \200000 ）
-
New inflatable rescue equipment based on mathematics of origami
2013.4 - 2014.2
The Japan Science Society Sasakawa Scientific Research Grant 2013
Sachiko Ishida
Authorship：Principal investigator Grant type：Competitive
Grant amount：\710000 （ Direct Cost: \710000 ）
Teaching Experience
-
Integrated Design Project
2025.4 Institution：Malaysia-Japan International Institute of Technology, University of Technology Malaysia
Level：Undergraduate (specialized) Country/Region：Malaysia
-
Mechanical Engineering Exercises
2024.9 - 2025.3 Institution：Department of Mechanical Engineering, Meiji University
Level：Undergraduate (specialized) Country/Region：Japan
-
Creative Engineering Design
2022.10 - 2023.1 Institution：Department of Mechanical Engineering, Meiji University
Level：Undergraduate (specialized) Country/Region：Japan
-
Interdisciplinary Area C (subject in omnibus form, in charge of Lecture "Origami expands future: from mathematics to engineering)
2018.7 Institution：Common general course, Graduate school of science and technology, Meiji University
Level：Postgraduate Country/Region：Japan
-
Advanced Design of Mechanical Structures
2018.4 Institution：Department of Mechanical Engineering, Graduate School of Meiji University
Level：Postgraduate Country/Region：Japan
-
Advanced Vibrational Science in Elastic Materials 2
2017.9 - 2018.1 Institution：Department of Mechanical Engineering, Graduate School of Meiji University
Level：Postgraduate Country/Region：Japan
-
Mechanical Engineering 1-4
2017.4 Institution：Department of Mechanical Engineering, Graduate School of Meiji University
Level：Postgraduate Country/Region：Japan
-
基礎機械工学２
2016.9 Institution：明治大学理工学部機械工学科
Level：Undergraduate (specialized) Country/Region：Japan
-
Mechanical Elements Design
2016.9 Institution：Department of Mechanical Engineering, Meiji University
Level：Undergraduate (specialized) Country/Region：Japan
-
Seminar 1and 2
2016.4 Institution：Department of Mechanical Engineering, Meiji University
Level：Undergraduate (specialized) Country/Region：Japan
-
Graduation Thesis 1and 2
2016.4 Institution：Department of Mechanical Engineering, Meiji University
Level：Undergraduate (specialized) Country/Region：Japan
-
Computer Aided Design of Mechanical Systems
2014.9 Institution：Department of Mechanical Engineering, Meiji University
Level：Undergraduate (specialized) Country/Region：Japan
-
Basic Material Mechanism
2014.9 - 2016.1 Institution：Department of Mechanical Engineering, Meiji University
Level：Undergraduate (specialized) Country/Region：Japan
-
Advanced Mathematical Sciences C (subject in omnibus form, in charge of Lecture "Foldable Structure Design Using Mathematical Method"), Ph. D. Program at Meiji Institute for Advanced Study of Mathematical Sciences (MIMS)
2014.9 Institution：Meiji Institute for Advanced Study of Mathematical Sciences
Level：Postgraduate Country/Region：Japan
-
Mechanical Engineering Experiments 2 "Measurements of dynamic friction of rolling bearings"
2014.4 Institution：Department of Mechanical Engineering, Meiji University
Level：Undergraduate (specialized) Country/Region：Japan
-
Lectures & Workshop "Methematics of Origami", "Origami Application to Engineering", Introduction to Mathematical Modeling and Application
Institution：Interdepartmental Comprehensive Course, Meiji University
Country/Region：Japan
Social Activities
-
大人が楽しむ科学教室2025「だれでも折紙工学～折紙をしながらエンジニアリングを体験する～」にて講師
Role(s)： Lecturer, Advisor, Informant, Demonstrator
千葉市科学館 大人が楽しむ科学教室2025 2026.2
-
第23回高校生・高専生科学技術チャレンジ予備審査委員
Role(s)： Advisor
朝日新聞社，テレビ朝日 2025.10
-
Speaker and facilitator of origami workshop for middle and high school students at Public Lecture, "Real Talk with STEM Senpai"
Role(s)： Lecturer, Advisor, Informant, Demonstrator
Adachi Ward, Tokyo, Japan 2025.8
-
Lecturer for primary school students at Meiji Univ. Liberty Academy, "Enjoy origami engineering"
Role(s)： Appearance, Advisor, Informant, Demonstrator
Meiji University Liberty Academy Spring semester in AY2025, Meiji University Liberty Academy Surugadai Campus, Meiji University 2025.6
-
The initiatives for diversity improvement at JSIAM in FY2024
Role(s)： Contribution
Japan Society for Industrical and Applied Mathematics Ouyousuri Vol. 35 No. 2 pp. 62-64 2025.6
-
Origami Engineering: Can a car with paper-made tires run?, introduction video published on atama+ website
Role(s)： Appearance, Media coverage, Informant
atama+ atama+ private school journal 2025.2
-
2024年度天童市・明治大学連携講座「折紙工学講座～折紙をしながらエンジニアリングを体験する～」にて講師
Role(s)： Appearance, Informant, Demonstrator
山形県天童市 山形県天童市 2024.12
-
Preliminary judge, Japan Science and Engineering Challenge 2024
Role(s)： Advisor
Asahi Shimbun Company, TV Asahi Corporation 2024.10
-
Organizer of The 22nd EPMEWSE Symposium
Role(s)： Organizing member, Report writing
Japan Inter-society Liaison Association Committee for Promoting Equal Participation of Men and Women in Science and Engineering (EPMEWSE) Chuo University 2024.10
-
女子中高生 夏の学校2024にてポスター展示と折紙ミニワークショップ
Role(s)： Informant, Demonstrator
NPO法人女子中高生理工系キャリアパスプロジェクト（GSTEM-CPP） 女子中高生 夏の学校2024 国立女性教育会館 2024.8
-
明治大学オープンキャンパス 理工学部機械工学科模擬授業「折紙の数理と機械工学」講師
Role(s)： Lecturer, Demonstrator
明治大学 明治大学生田キャンパス 2024.8
-
"Origami expanding structure design," Science Magazine (in Japanese)
Role(s)： Informant, Contribution
Iwanami Shoten Publishers Science magazine No. 7, 2023 2023.6
-
明治大学研究ブランディング事業第8回公開シンポジウム「未来を拓くロボットテクノロジー」コーディネータ
Role(s)： Presenter
明治大学 オンライン 2023.3
-
Research introduction "Expand Possibility of Origami: Heading Toward Implementation of Origami Application"
Role(s)： Appearance, Informant
Industrial Growth Platform Inc. Top Researchers 2022.12
-
Lecture "Origami Engineering", Autumn course, Liberty Academy, Meiji University
Role(s)： Lecturer, Informant
Liberty Academy, Meiji University Online 2022.11
-
Introductory article of special lecture at Tokyo Gakugei University Senior High School published on Nikkei Science
Role(s)： Media coverage, Informant
Nikkei Science Nikkei Science (Scientific American Japanese Edition)（January, 2023） 2022.11
-
Introductory article of special lecture at Tokyo Gakugei University Senior High School published on Nihon Keizai Newspaper
Role(s)： Appearance, Media coverage
2022.10
-
Laboratory public open day for junior-high and high school studays
Role(s)： Informant, Planner, Demonstrator
Meiji University Ikuta Campus, Meiji University 2022.8
-
2021年度秋期 明治大学リバティアカデミー 講座「折紙による展開収縮構造のデザインと応用例」
Role(s)： Lecturer, Informant
明治大学リバティアカデミー オンライン 2021.11
-
Research introduction, Mecha-top Kanto #48, News letter of Kanto branch, JSME
Role(s)： Informant, Contribution
Kanto branch, Japan Society of Mechanical Engineers Mecha-top Kanto #48 2020.7
-
Lecture "Origami Engineering", Autumn course, Liberty Academy, Meiji University
Role(s)： Lecturer, Informant
2019.11
-
神奈川県立川崎図書館「県立川崎図書館で出会う本～研究者、技術研究者、司書が選ぶ60冊～」書評の掲載
神奈川県立川崎図書館 p. 6 2019.11
-
Public talk "Can a car run with paper-made tires? : 2-month challenge of 12 students," Meiji University Academic Fest. 2019
Role(s)： Appearance, Informant
Meiji University Meiji University Academic Fest. Meiji University 2019.11
-
An interview article of our research activities is published in the academic magazine, Nextcom.
KDDI Research, Inc. "Exploring 5 years into the future," in the academic magazine, Nextcom. Vol.37 Spring, pp. 52-57 2019.3
-
平成30年度ダイバーシティ研究環境実現イニシアティブシンポジウム 「ダイバーシティ×イノベーション」にて講演
Role(s)： Appearance, Panelist
電気通信大学，津田塾大学，NTT先端技術総合研究所 平成30年度ダイバーシティ研究環境実現イニシアティブシンポジウム 電気通信大学 2019.2
-
2018年度秋期 明治大学リバティアカデミー 講座「折紙構造の優れた特性とその産業化のための課題と解決について 」
Role(s)： Lecturer, Informant
明治大学リバティアカデミー 2018年度秋期 明治大学リバティアカデミー 明治大学生田キャンパス 2018.11
-
Our research activities are picked up as "Innovative research" in "Daigaku no yakusoku," information magazine on academic counseling
Role(s)： Appearance, Media coverage, Informant
Recruit Marketing Partners Co., Ltd. Daigaku no yakusoku 2018-2019 pp. 126-127 2018.9
-
研究成果のプレスリリース配信「球状ハニカムコアを開発 第8回世界水フォーラムにて発表」
Role(s)： Lecturer, Informant, Planner, Organizing member, Report writing
明治大学広報課プレスリリース 2018.5
-
明治大学アカデミックフェスにてSDGsに貢献するアイデアコンテスト審査員および折紙工学研究紹介ポスター展示・動画上映
Role(s)： Media coverage, Informant
明治大学，C&R社 明治大学アカデミックフェス 明治大学駿河台キャンパス 2017.11
-
イノベーション・ジャパン2017～大学見本市＆ビジネスマッチング～にて展開収縮構造を用いた防振器を展示
Role(s)： Media coverage, Informant
科学技術振興機構，新エネルギー・産業技術総合開発機構 イノベーションジャパン 大学見本市 東京ビッグサイト 2017.8 - 2017.9
-
明治大学オープンキャンパス 女子中高生対象プログラムにて数理折紙の体験コーナー
Role(s)： Lecturer, Advisor, Informant, Planner, Organizing member, Demonstrator
明治大学男女共同参画推進センター 明治大学オープンキャンパス 明治大学生田キャンパス 2017.8
-
明治大学オープンキャンパス 理工学部機械工学科模擬授業「折紙の数理と機械工学」講師
Role(s)： Lecturer
明治大学 明治大学オープンキャンパス 明治大学生田キャンパス 2017.8
-
2017年度春期 明治大学リバティアカデミー 講座「折紙工学と折紙の手法を取り込んだ折紙式3次元プリンターの現状と課題 」
Role(s)： Lecturer, Informant
明治大学リバティアカデミー 2017年度春期 明治大学リバティアカデミー 明治大学 2017.5
-
日刊工業新聞に研究紹介記事が掲載
Role(s)： Media coverage, Informant
日刊工業新聞社 日刊工業新聞 2017年4月27日朝刊 2017.4
-
明治大学 Gallery Zero 「折紙工学の今―折紙工学と折紙式プリンターで産業イノベーションを！」，展開収縮構造の展示
Role(s)： Informant
明治大学 Gallery Zero 2016.11
-
明治大学科学技術研究所2016年度 第2回公開講演会 『産業のイノベーションを目指す折紙工学最前線』「折りたたみの数理で産業のイノベーションを！」
Role(s)： Lecturer, Informant
明治大学科学技術研究所 明治大学科学技術研究所2016年度 第2回公開講演会 明治大学 2016.11
-
明治大学 高校生のための先端数理科学見学会にて講演 「折りたたみの数学～折紙が広げるハイテクの世界～」
Role(s)： Lecturer
明治大学 先端数理科学研究科 明治大学 高校生のための先端数理科学見学会 明治大学 2016.8
-
2016年度春期 明治大学リバティアカデミー 講座「身近な数学と情報技術について楽しく学ぶ・PartⅥ ～折紙工学と折紙の手法を取り込んだ折紙式3次元プリンターについて学ぶ～」
Role(s)： Lecturer, Informant
明治大学リバティアカデミー 2016年度春期 明治大学リバティアカデミー 2016.6
-
2016年度春期 明治大学リバティアカデミーオープン講座『やさしく学ぶ「男女共同参画」～来て見て知って，話してみよう～』
Role(s)： Panelist
明治大学 男女共同参画推進センター 女性研究者研究活動支援事業推進本部 2016年度春期 明治大学リバティアカデミーオープン講座 2016.5
-
明治大学 Gallery ZERO 「世界が注目する折紙工学 ―折紙工学から折紙式3次元プリンターへ―」，展開収縮構造からなる防振機構，筒型展開収縮構造の展示
Role(s)： Informant
明治大学 Gallery ZERO 2015.11
-
三鷹ネットワーク大学企画講座「折りたたみの科学～折紙から昆虫の翅(はね)まで～」にて講師
Role(s)： Lecturer, Demonstrator
2015.4
-
Demonstration & lecture, "Dynamic Origami: Forms, Motions and Application," Kakehashi Project, Japan Foundation
Role(s)： Lecturer, Demonstrator
Japan Foundation Kakehashi Project, Japan Foundation 2015.3
-
Demonstration & lecture, "Origami Brings about Innovation: From Traditional Culture to Industrial Products", Kakehashi Project, Japan Foundation
Role(s)： Lecturer, Demonstrator
Japan Foundation Kakehashi Project, Japan Foundation 2014.10
-
Science booth "Let's make origami spirals", Science in life, The 6th Tokyo International Science Festival
Role(s)： Lecturer, Demonstrator
2014.10
-
Lecture at Science Cafe Mitaka "Origami Expands High-Tech World"
Role(s)： Lecturer, Demonstrator
Science Cafe Mitaka 2014.3
-
Exhibition of mathematical origami, "Everything is under control of computation!?"
Role(s)： Informant, Demonstrator
2014.3
-
Lecture for origami instructors (Course D), Nippon Origami Association
Role(s)： Lecturer
2013.10
Media Coverage
-
"Extremely Niche Laboratories," CBC TV TV or radio program
CBC TV Broadcasted at 9pm on 4 February, 2026 2026.2
-
Research introduction on Mirai Book, Information website for junior high & high school students by Kawaijuku Internet
Kawaijuku Mirai Book 2024.3
-
Research introduction on Made in Japan, "The future is folding." Newspaper, magazine
Engawa Co., Ltd. Made in Japan, English-language information magazine for foreign visitors and residents in Japan. Vol. 2, pp. 50-51 2022.6
-
科学技術振興機構が運営する情報サイト「客观日本」にて日本学術振興会賞受賞記事が中国語で紹介「日本学术研究的推动力－25人荣获第18届日本学术振兴会奖」 Internet
科学技術振興機構 客観日本 2022.2
-
Research introduction on milsil "Mathematics Expands Origami to Engineering" Newspaper, magazine
National Museum of Nature and Science, Japan milsil, information magazine of National Museum of Nature and Science, Japan Vol. 85, pp. 18-21 2022.1
-
Article to introduce JSPS prize winners published on the Science News Newspaper, magazine
The Science News Ltd. The Science News p. 4 2022.1
-
Research introduction on Instron Inc. website "Origami-based structures under Impact load" Internet
Instron Inc. Instron Inc. website 2021.7
-
National Geographic×Meiji University×JAXA Online Open Campus "Origami Engineering Expands Our Life and Space Technology" Internet
National Geographic National Geographic Online 2020.12
-
Innovations Incorporating Traditional Japanese Crafts Into Modern Life, Forbes, US financial web magazine Newspaper, magazine
Forbes 2020.11
-
神奈川県立川崎図書館「県立川崎図書館で出会う本～研究者、技術研究者、司書が選ぶ60冊～」書評の掲載 Promotional material
神奈川県立川崎図書館 p. 6 2019.11
-
TV show "Seriously, aiming at Ig Nobel Prize!," NHK BS Premium TV or radio program
Broadcasted on 22:30-23:30, June 29th, 2019 2019.6
-
朝日新聞広告特集「大学力2019」教員インタビュー記事掲載 Newspaper, magazine
朝日新聞×「大学ランキング」タイアップ企画 2019年5月30日朝刊p.23 2019.5
-
An interview article of our research activities is published in the academic magazine, Nextcom. Newspaper, magazine
KDDI Research, Inc. "Exploring 5 years into the future," in the academic magazine, Nextcom. Vol.37 Spring, pp. 52-57 2019.3
-
Our research is introduced at Kidsashi, Science and Technology Foresight Center, Ministry of Education, Culture, Sports and Technology. Internet
Science and Technology Foresight Center, Ministry of Education, Culture, Sports and Technology Kidsashi 2018.3
-
イノベーション・ジャパン2017～大学見本市＆ビジネスマッチング～にて展開収縮構造を用いた防振器を展示
科学技術振興機構，新エネルギー・産業技術総合開発機構 イノベーションジャパン 大学見本市 東京ビッグサイト 2017.8
-
日刊工業新聞に研究紹介記事が掲載 Newspaper, magazine
日刊工業新聞社 日刊工業新聞 2017年4月27日朝刊 2017.4
-
日経産業新聞「次世代の先導者」に研究者紹介が掲載 Newspaper, magazine
日本経済新聞社 日経産業新聞 2017年3月2日朝刊 2017.3
-
化学工業日報に「第8回資生堂女性研究者サイエンスグラント」授賞式の記事および受賞者の写真掲載． Newspaper, magazine
化学工業日報社 化学工業日報 2015年6月15日第5面 2015.6
-
高校生向け雑誌HR「各界のスペシャリスト 大学の先生をズバッと紹介！」に教員と折紙工学の紹介記事掲載 Newspaper, magazine
株式会社グラフィティ 東京グラフィティ増刊HR HR#027 (2014年8月10日発行), p. 127 2014.8
-
TBS「未来の起源」に出演 TV or radio program
TBSビジョン TBSビジョン 未来の起源「折紙に秘められた無限の可能性」 2014年6月1日22:54～23:00放送 2014.6
Academic Activities
-
The initiatives for diversity improvement at JSIAM in FY2025
Japan Society for Industrial and Applied Mathematics 2026.6
-
The initiatives for diversity improvement at JSIAM in FY2024
Japan Society for Industrical and Applied Mathematics 2025.6
-
Research Introduction, in "Strengthening and improving research infrastructures in private universities in the science and technology fields for promotion of technology innovation"
Japan Association of Private Universities and Colleges （ p. 84 ） 2020.5
-
Exhibition of spherical honeycomb cores and introduction to research achievements at the 8th world water forum
2018.3
Click to view the Scopus page. The data was downloaded from Scopus API in April 04, 2026, via http://api.elsevier.com and http://www.scopus.com .